BLOWN 40 AMP FUSE HONDA HOW TO
BLOWN 40 AMP FUSE HONDA INSTALL

BLOWN 40 AMP FUSE HONDA HOW TO

Watch the video explanation about How to check large clear fuses Online, article, story, explanation. These fuses are typically used in conjunction with an 80 amp maxi fuse. Here you may to know how to pull 40 amp fuse. The 15 amp fuse is fine weirdly enough, but I'm not sure if the Multi Safer is ok, I'll probably need a new one.Īm I doing something wrong here? I am soldering the wires to my fuse taps for good connections and I'm grounding the multi safer on the same bolt that I grounded my radar detector which I also hard wired at the same time today and works fine. A 40 amp fuse is a high current fuse that is used to protect car audio systems. Once I went to connect the wiring to the Multi Safer, I heard a pop and smelled burnt circuit. So I went for a 15 amp fuse and this time I unplugged the Multi Safer before putting the fuse tap into the fuse box. Went to Autozone and called Honda and thought since the Multi Safer says it can run up to 8 amps times that I should try a better fuse. Remove the plastic top cover and check for damages in the fuse wire. You can tell that a 40 amp fuse is blown by visually inspecting it. The fuse wire that is supposed to allow current to flow through it will appear melted/broken. Thinking I put it in wrong, I grabbed the spare 5 amp fuse from the car and tried that, blew that one too. show Key Takeaway You can tell that a 40 amp fuse is blown if you visually inspect it. If it doesnt move and should, use the WD-40. Most 4-wheeler problems are caused by a loose nut connecting the handlebars and the seat You only need two tools in life - WD-40 and duct tape. Once I went to connect the wiring to the Multi Safer, I heard a pop and smelled burnt circuit. If its not in the fuse box, it will have an inline fuse on the red wire coming from one of the posts on the solenoid. I replaced the glow plug relay, because it was making a weird sound.

BLOWN 40 AMP FUSE HONDA INSTALL

When I tried to install it today into a free cavity on the fuse box, I blew the 5 amp fuse the second it made contact with the fuse box. Went to Autozone and called Honda and thought since the Multi Safer says it can run up to 8 amps times that I should try a better fuse. Now, every time I turn the key to on there is a click and the 40 amp fuse blows. Trying to hardwire my Blackvue 650S with a Multi Safer hardwiring kit, which is supposed to be a lot more reliable and only needs constant power and ground (instead of power, accessory, and ground)

Blown 40 amp fuse honda